136267 - Dodge - P2B-GTM-85M

The Dodge Grip-Tight mounted ball bearing is the maintenance-friendly solution for all of your ball bearing application needs, capable of performing critical functions in many operations. Grip-Tight mounted ball bearings offer a unique method of shaft attachment via a thin wall tapered adapter sleeve and locknut design. Because of this system, bearing assemblies may be installed and removed from a shaft easily. 360 deg of concentric grip on the shaft for the entire length-through-bore of the bearing means Grip-Tight provides a tight press fit with no shaft damage, even on commercial grade shafting. Dodge Pillow Block Ball Bearing Unit, Medium Duty, Series: 218 Series, 85 mm Bore Dia, 262.1 to 295.1 mm Bolt Center-to-Center Length, 101.6 mm Base to Bore Centerline, 355.6 mm Overall Length, 71.1 mm Overall Width, 203.2 mm Overall Height, Two-Bolt Base Mount, Round Bore Type, 85.9 mm Base Width, Grip-Tight Adapter Mount Locking Device, Single Lip Seal, Non-Expansion Expansion Type, 21451 lb Dynamic/16641 lb Static, 3800 rpm Maximum, Cast Iron, Uncoated Wide inner ringPatented pull/push thin wall adapter systemIdeal for high-speed applications in which concentricity is importantLittle or no bearing vibration at high speedsMore efficient fan balancingDecreased labor during removal with no shaft reconditioningAlleviates setscrew issues due to vibrationPatented DualGuard seal, featuring the rubberized flinger is standard